3
11. From the main screen, select
Local IP Config
.
Figure 5. Main Screen
12. Change the
Static IP,
Subnet Mask
and
Gateway
to
match your local network settings.
NOTE:
Since we are using a static IP address here, make
sure no other device on your network is using that
IP address.
Figure 6. Local Network Settings
13. Select
Save
to continue.
14. From the main screen perform the following:
a. Select
RS485
.
b. Change
Baud Rate
to
9600
.
c. Change
Work Mode
to
TCP Server
.
d. Set
Local Port
number to
10001
.
Figure 7. RS-485 Settings
15. Select
Save
to continue. Once saved, you can
disconnect the Ethernet cable from your PC and
connect the Ethernet Converter directly to your router.
16. Restore your computer’s Internet Protocol Version 4
(TCP/IPv4) settings back to their original configuration.
NOTE:
Remember when attempting to browse to the
Ethernet Converter’s web page, you have to use
the IP address set in figure 6.
OPTION 2
1.
Download the following file from the following location:
http://www.usriot.com/usr-tcp232-m4e45-setup-v2-3-0-78/
2. Connect the provided Ethernet cable between your
computer and Ethernet Converter.
3. Connect the provided AC adapter to the Ethernet
converter and plug AC adapter into wall outlet.
4.
Execute the file that you downloaded in step 1.
USR-
TCP232-M4_E45 V2.3.0.78.EXE
5. The following Search Device screen will appear. Select
Search Device
to find the Ethernet Converter.
Figure 8. Search Device Screen
