2
Configure Ethernet Converter
Default Settings
Table 2. Default Settings
User Name
admin
Password
admin
IP Address
192.168.0.7
Subnet Mast
255.255.255.0
Default Gateway
192.168.0.1
Default Work Mode
TCP Server
Default Local Port
23
Baud Rate
115200
Parity Bit/Data Bit/Stop Bit
None / 8 / 1
OPTION 1
The following procedure is for Windows 7. Procedures for
later Windows versions may differ.
1. Connect the provided Ethernet cable between your
computer and Ethernet Converter.
2. Connect the provided AC adapter to the Ethernet
converter and plug AC adapter into wall outlet.
3. From the computer being used, click
Start
>
Control
Panel
and double-click on
Networking and Sharing
Center
.
4. Double-click on
Change adapter settings
.
5. Double-click on
Local Area Connection
.
6. Under
Local Area Connection Status
click on
Properties
.
7. Double-click on
Internet Protocol Version 4 (TCP/
IPv4)
.
Figure 2. Local Area Connection Properties
8. Select
Use the following IP address
. Enter the
information as shown in figure 3.
NOTE:
Write down your original settings so you can
restore them back to their original configuration
once you are done with this procedure.
Figure 3. Internet Protocol Version 4 Properties
9. Click
OK
to continue.
10. Go to your Internet browser and type
http://192.168.0.7
to access
t
he device’s home web page. Type in the
User Name
and
Password
(admin and admin).
Figure 4. Login Screen
