6
CAUTION
To prevent danger of cuts to hands, use protective gloves.
2.2.
IMPORTANT SAFETY WARNINGS
Below are some safety tips to be followed during the installation and use of the unit.
•
The unit must be installed in accordance with the diagrams and recommendations
provided by the Manufacturer.
•
Damage due to improper connections is not covered.
•
A neutral conductor may not be used as a protection conductor, even if it has an earth
connection.
•
The electrical installation on the premises where the unit is installed must be in
compliance with the applicable regulations concerning electrical installations and
electromagnetic protection.
•
For equipments with centrifugal fan, before starting the machine you must connect a
pipe of at least one meter to the fan. This connection must be made so that there are no
openings.
•
Maintenance of the unit must be carried out by qualified, authorised staff, in compliance
with all the stipulations set out in standard EN378 and the regulations applicable to this
effect in each particular country.
•
Guards should only be removed for maintenance or repair
•
It is necessary turn off the unit before removing the fan or remove its guard to perform
maintenance or repair
If the user wishes to use the unit for any purpose it is not designed for, particularly during its use,
or for any servicing they wish to have done, they must ask the Manufacturer to inform them of
any contraindications or hazards that could arise from improper use of the unit.
•
The unit must be used in accordance with the instructions for use and for the purposes
for which it was designed by the Manufacturer. Any improper use of the equipment
constitutes an anomalous condition and may cause damage to the unit itself and be a
serious health hazard for other people.
•
No refrigerant of a type other than that indicated is to be used.
•
No modifications or alterations of the components’ cooling and electrical circuits are to
be made, or any soldering in the compressor or cabling modifications.
•
The end user must protect the installation against fire hazard.
CAUTION
This unit is not designed to work in a saline atmosphere. In this case the condenser
and/or evaporator will need to be protected using the most suitable systems.
CAUTION
This unit is not designed to work in an explosive atmosphere. Its use in a potentially
explosive environment is therefore strictly forbidden.