Lenel DirecDoor, Installation Manual

Page: 67 / 90

DirecDoor Installation Guide
67
Integrated Configuration Tool (ICT)
Parameters Form
1.
Click the Controller Information menu to open Parameters form.
2.
Enter the host Port Number or accept the default port 3001.
3.
Click Save .
4.
If this completes your controller configuration, click Reset Controller .
Controller Information Menu > Information Form
Access the Controller Information menu and select the Information tab. The Information form
provides access to several status reports which are provided for checking and monitoring the
controller. These reports are used by technical support staff to troubleshoot controller issues.
Information Form > Selection Items
1.
Click the Controller Information menu and then click the Information tab.
2.
On the Information form, in the Select Items field, click the down arrow for a list of available
reports.
3.
Select the desired report. Refer to table Controller Information Reports on page 68 for brief
descriptions of each report.
4.
If technical assistance is needed, capture the report output by copying and pasting the output to a
text file (for example, using Notepad). Contact technical support on www.lenel.com.