Rear Panel
1.
Audio Level LEDs
The Audio Level LEDs indicate the audio
input level as low, good, or clipped.
2.
LED Indicators
The LED indicators display various
conditions and functions such as network
activity and relay status.
See “Using the
System” for detailed information.
3.
Switches
The switches are used to make a number of
adjustments to the system without using a
computer.
4.
LCD display
The LCD displays various diagnostic
messages and configuration information
about the system.
5.
GND
For external auxiliary equipment.
6.
OP1 speaker connectors
Speaker connectors for OP1 channels A, B,
C, and D using RJ45 connectors.
7.
IR Inputs
Connect the IR
input to a Lencore’s IR
device using an RJ45 cable for OP1 and OP2.
8.
OP2 speaker connectors
Speaker connectors for OP2 channels A, B,
C, and D using RJ45 connectors.
9.
RCA Audio Input
Connect a line level audio source using an
RCA cable.
2
10.
AUX connector
Connector for external equipment.
11.
Ethernet
Connect an Ethernet cable to access the
Protocessor.
12.
Power Input
Power cord connector (IEC 60320).
100-240VAC.
Front Panel
