Zone:
Press the
OPT
button until “ZN” is displayed.
Press the
SEL
button until the curser is on the value to change (Zone number or volume).
Use the up and down
arrows
to increment and decrement the selected value.
Music Mute:
Press the
FUNC
button until “Music Mute” is displayed.
OP/Channel:
Press the
OPT
button until “OP” is displayed.
Press the
SEL
button until the curser is on the value to change (OP number, ALL OPs, channel
letter, ALL channels, or volume).
Use the up and down
arrows
to increment and decrement the selected value.
Zone:
Press the
OPT
button until “ZN” is displayed.
Press the
SEL
button until the curser is on the value to change (Zone number or volume).
Use the up and down
arrows
to increment and decrement the selected value.
IP Info:
Press the
FUNC
button until “IP Info” is displayed.
Press the
OPT
button to select the IP address, subnet, gateway, and MAC ID.
The IP information will be shown in the display.
Voltages:
Press the FUNC button until Voltages is displayed.
Press the
OPT
button to select the various voltages to display.
Note: Voltages cannot be changed, they can only be monitored.
Faults:
Press the
FUNC
button until “Faults” is displayed.
Press the
SEL
button until the curser is on the value to change (Clear, Mute, Fault number).
Use the up and down
arrows
to scroll through the fault list.
The
OPT
button has no use for Faults.
Versions:
Press the
FUNC
button until “Versions” is displayed.
Press the
OPT
button to select Neuron or SM2.
The version number will be shown in the display.
RCA Volume:
Press the
FUNC
button until “RCA Volume” is displayed.
Use the up and down arrows to raise or lower the volume of the RCA Input.
8
