LENCO SPB-260, User Manual

Page: 13 / 84

13
Wired connections
USB
For USB playback follow the steps listed below.
Note: The speaker set may not support some USB memory stick due to the
incompatibility of some processors. This speaker set only supports the MP3
file format for playback.
1. Plug in your USB flash drive (1)
(the USB mode isn’t selectable on the
master unit speaker or remote control unless a USB flash drive is
connected)
2. Make sure the USB flash drive is plugged in and unit is switched ON. Press
the multifunction control knob (8) several times or press the INPUT button (14)
on the remote control several times until the indicator LED is flashing pink.
3. After a few seconds, the unit will automatically read the files and begin
playing music automatically.