E 4
FOR NORMAL COMPACT DISC PLAYBACK
Mode sequence REPEAT >> REPEAT ALL >> CLEAR.
During Repeat 1 mode,
display shows
During Repeat 2 mode,
display shows
During Repeat 3 mode,
display shows
REPEAT , REPEAT ALL , REPEAT A B , REPEAT FOLDER PLAYBACK
MP3/WMA/USB display
CD display
FOR MP3 / WMA / USB PLAYBACK
Mode sequence REPEAT >> REPEAT ALL >> REPEAT
FOLDER >> CLEAR.
During Repeat 1 mode,
display shows
During Repeat 2 mode,
display shows
During Repeat 3 mode,
display shows
During Repeat 4 mode,
display shows
Press PLAY MODE button during stop mode.
FOR MP3 / WMA / USB PLAYBACK
Mode sequence REPEAT >> A REPEAT >>
A-B REPEAT >> REPEAT ALL >> FOLDER.
During Repeat 1 mode,
display shows
During Repeat 2 mode,
display shows
During Repeat 3 mode,
display shows
During Repeat 4 mode,
display shows
During Repeat 5 mode,
display shows
During Repeat 6 mode,
display shows
FOR NORMAL COMPACT DISC PLAYBACK
Mode sequence REPEAT >> A REPEAT >>
A-B REPEAT >> REPEAT ALL.
During Repeat 1 mode,
display shows
During Repeat 2 mode,
display shows
During Repeat 3 mode,
display shows
During Repeat 4 mode,
display shows
During Repeat 5 mode,
display shows
Press PLAY MODE button during playback.
Note on CD-R/RW discs
- Because of non-standardized format definition/ production
of CD-R/RW, playback quality and performance are not guaranteed.
- Manufacturer is not responsible for the playability of CD-R/RW due to
recording conditions, such as PC performance, writing software, media ability, etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
CD display
PROGRAMMED CD OPERATION
FOR NORMAL COMPACT DISC PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order. Up to 20 tracks can be programmed.
1. Program mode works in STOP mode only.
2. Holding “RANDOM / P - / PROGRAM / MEMORY” button for 2 seconds to enter program mode. The “PROG” icon
will be turned on. “000 P01” will be shown with “000” flashing. “000” represents track number and “P01”
represents program location number.
3. Press TUNE + / NEXT or TUNE - / BACK button to select the required track number.
4. Press “RANDOM / P - / PROGRAM / MEMORY” button to confirm the track number. The display will show the
next program number “000 P02”. The track number will be flashing again and waiting for track number input.
5. Repeat steps 3 and 4 until all the desired tracks has been programmed or all the program memories have been used.
It will loop back to P01 after all the program memories have
been used. Same track number can be programmed more than once.
6. Press ENTER/PLAY/PAUSE button to playback.
7. To clear the programmed tracks, first press “RANDOM / P - / PROGRAM / MEMORY”
button for 2 seconds to enter program mode.
8. Press STOP button to clear all the programmed memories.
For CD : Total number of tracks and time will be shown.
For MP3/WMA/USB: Total number of tracks and folder will be shown.
For CD : The folder tracks number and time will be shown.
For MP3/WMA/USB: The folder tracks number and folder will be shown.
CD display
MP3/WMA/USB display
SCR186-AMFM ENG-MP3-WMA-USB-LENC6 6
7/7/2006 5:53:11 PM
