POWER SUPPLY
USING HOUSE CURRENT
Before use, check that the rated voltage
of your unit matches your local voltage.
USING BATTERIES
Disconnect the AC power cord from the AC inlet of the
unit. Battery power is cut automatically when the cord
is connected.
Insert 8 UM-2 ( size C ) batteries.
battery door
When the volume decrease, or the sound distorts, replace
all of the batteries with new ones.
To AC socket
To AC outlet
E 2
ADJUSTING THE SOUND
Press /- to adjust volume level.
FOR PRIVATE LISTENING
Plug in the headphone (ø3.5 mm stereo mini-plug) to the
PHONES jack.
When the headphone is plugged in, the speakers are
automatically disconnected.
VOLUME
VOLUME
Press the ON / STANDBY button to turn the audio on. To change the audio mode between,
CD , RADIO , USB DISK and TAPE, press FUNTION button while the power is on. The audio
mode is displayed.
Power will be cut off automatically when CD, MP3 and USB function is in stop mode for 15 minutes.
TURN ON / OFF THE SYSTEM
FOR BETTER RECEPTION
FM
AM
Tuning a RADIO Station
1. Press FUNCTION button repeatedly until
“TUNER” is shown.
2. Press the BAND / FOLDER button to select the
desired frequency band (FM or AM).
3. Press the TUNE + / NEXT or TUNE - / BACK button
as many times as required to tune in to the desired
station.
4. Press and hold the TUNE + / NEXT or TUNE - /
BACK button for more than 1 second, scanning starts
automatically and tuner stops at the first receivable
broadcast station.
5. To stop the auto tuning, press the TUNE + / NEXT or
TUNE - / BACK button again.
Selecting FM Stereo/Mono mode
1. To select FM stereo/mono mode, press STEREO/
MONO button on the remote control.
2. “STEREO” icon will be lit on when receiving station is
broadcasted in Stereo.
3. To select mono mode, press STEREO / MONO button
again.
4. “STEREO” icon will never turn on in FM MONO mode.
TUNER OPERATION
SCR186-AMFM ENG-MP3-WMA-USB-LENC4 4
7/7/2006 5:53:09 PM
