LENCO L-3866 USB, User Manual

Page: 13 / 20

Pause - temporarily
stops playback or
recording until you
press pause again.
Stop - stops
recording or playing.
You must do this
before
applying
effects , saving or
exporting.
Skip to End - moves
the cursor to the end
of the last track.
Edit Toolbar
All of the buttons on this toolbar perform
actions - and with a couple of exceptions,
they're all just shortcuts of existing menu items
to save you time. Holding the mouse over a
tool will show a "tooltip" in case you forget
which one is which.
Cut
Copy
Paste
Trim away the audio outside the
selection
Silence the selected audio
Undo
Redo (repeat last command).
Zoom In
Zoom Out
13
All of the buttons on this toolbar perform
and with a couple of exceptions,
they're all just shortcuts of existing menu items
to save you time. Holding the mouse over a
tool will show a "tooltip" in case you forget
Trim away the audio outside the
Silence the selected audio
Redo (repeat last command).
Fit selection in window
selection just fits inside the window.
Fit project in window
the audio just fits inside the window.
Track Pop-Down Menu
The Track Pop-Down Menu appears when you
click in a track's title. This lets you access a
few special commands that apply to individual
tracks.
Name... - lets you change the name of the
track.
Move Track Up - exchange places with the
track above this one.
Move Track Down - exchange places with the
track below this one.
Waveform - sets the display to Waveform
this is the default way of visualizing audio.
Waveform (dB) - similar to Waveform, but on
a logarithmic scale, measured in decibels (dB).
Spectrum - display the track as a
spectrogram, showing the amount of energy in
different frequency bands.
Pitch (EAC) - highlights the contour of the
fundamental frequency (musical pitch) of the
audio, using the Enhanced Autocorrelation
(EAC) algorithm.
Mono - makes this track a mono track,
meaning it is played out of just one speaker
played out of the left and right speakers
equally.
Left Channel - makes this track come out of
only the left speaker.
Right Channel - makes this track come out of
only the right speaker.
Make Stereo Track - if there is another track
below this one, joins them to make a single
stereo track, with the top track representing the
Fit selection in window - zooms until the
selection just fits inside the window.
Fit project in window - zooms until all of
the audio just fits inside the window.
Down Menu appears when you
click in a track's title. This lets you access a
few special commands that apply to individual
lets you change the name of the
exchange places with the
exchange places with the
sets the display to Waveform -
this is the default way of visualizing audio.
similar to Waveform, but on
a logarithmic scale, measured in decibels (dB).
display the track as a
spectrogram, showing the amount of energy in
ferent frequency bands.
highlights the contour of the
fundamental frequency (musical pitch) of the
audio, using the Enhanced Autocorrelation
makes this track a mono track,
meaning it is played out of just one speaker, or
played out of the left and right speakers
makes this track come out of
makes this track come out of
if there is another track
joins them to make a single
stereo track, with the top track representing the