background image

GB-6 

 

4. SPEAKER SETUP 
4.1 DOWNMIX   

Options: LT/RT - Left/Right mix mode 
                STEREO - Stereo mode 

4.2 EXIT SETUP

 - Select it to exit the setup menu. 

 

RADIO OPERATION 

TO PLAY THE RADIO 

1. Press FUNCTION button repeatedly to switch to RADIO 

mode (At the moment, the TFT display will be turned off), the 
radio Indicator will light up and the LCD shows the current 
frequency and band. 

2. Select the desired band with STOP/BAND button until your 

desired band shows in the LCD. 

3. Tune to the desired station by pressing TUNE UP/DOWN 

button (Press TUNE UP/DOWN button repeatedly until you 
get the strongest clearest sound). 

4. When receiving a FM ST station, the relative icon will show in 

the LCD.   

5. The AM antenna and external FM ANTENNA are directional. 

y

  When receiving an FM broadcast, unfold the FM antenna 

and place it in the best position for the best reception. 

y

  For AM broadcasts, rotate AM antenna until the best 

reception is heard. 

There are two clips on the AM antenna in. Press these 
two clips to connect the AM antenna easily as the 
illustration for AM reception. 

 

 

6. Adjust the volume level to a comfortable listening level. 
7. Press the POWER button to turn off the radio. 
Note: If a particular FM (STEREO) station is weak, or you hear 
too much background noise, press ANGLE/ST/MONO button 
on the remote to switch FM (MONO). This can often result in a 
much clearer reception. 

 

TO STORE THE RADIO STATION (UP TO 10 FOR AM / 30 
FOR FM) 

1. Press BAND button to select your desired band and tune to 

your favorite station via TUNE UP/DOWN button. 

2. Press memory button and select the stored position via MEM 

UP/DOWN button. 

3. Press MEMORY button to save the radio station and exit the 

memory mode. 

Note: The relative information will be shown in the LCD during 
the procedures of saving radio station. 
To recall the saved station, Press MEM UP/DOWN button 
directly to select your desired station saved in the memory for 
listening.  
 

SET TIME 

Please set time as the below procedure: 
1. Press standby button to switch to standby mode and press 

CD DOOR OPEN/CLOSE button on the unit, the hours 
flickers for adjusting. 

2. Press NEXT/TUNE UP button or PREVIOUS/TUNE DOWN 

button to adjust hour. 

3. After adjustment, press CD DOOR OPEN/CLOSE button 

again to confirm and the minute flashes for adjusting. 

4. Use NEXT/TUNE UP button or PREVIOUS/TUNE DOWN 

button to adjust minute. 

5. Finally, press OK button to save the time. 
Note: You only could set time in standby mode. 
 

ALARM OPERATION 

The unit is with alarm function, you could set alarm as below 
steps in standby mode: 
1. Press and hold ALARM button on the unit until the hour 

flashes in the LCD with the flickering alarm icon. 

2. Press NEXT/TUNE UP button or PREVIOUS/TUNE DOWN 

button to adjust hour. 

3. Press ALARM button to confirm. And the minute flashes to 

wait for you adjust. 

4. Use NEXT/TUNE UP button or PREVIOUS/TUNE DOWN 

button to adjust minute. 

5. Press ALARM button again to save. 
6. Use NEXT/TUNE UP button or PREVIOUS/TUNE DOWN 

button to select the alarm mode (b b- when the alarm comes 
on, the unit will sound Bi Bi... Fun- when the alarm comes on, 
the unit will be turned on.) 

7. Finally, use ALARM button to save all settings. 
Press ALARM button to enable or disable the function. The 
LCD show Alarm icon while the alarm is on.   
Note: The alarm only could be set in standby mode. 
 

SET TIMER   

The timer function is used to time for reminding while cooking. 
Set the timer as below procedures: 
1. Press TIME button repeatedly to select the approximate time 

among 10, 15, 30, 45, 60, 75, 90, 180, OFF. 

2. Then use TUNE UP/DOWN button to increase or decrease 

the minute for exact time 

3. Press OK button to confirm. 
When it reminds with sound, press TIME button to stop it. 
After setting the timer, press COUNT DOWN button on the unit 
or COUNT DOWN button on the remote to check the remain 
time.  
 

DVB OPERATIONS 

GET STARTED 

y

  Be sure the TV antenna is connected to your player 

properly;  

y

  Power on the player and press FUNCTION button several 

times to switch to DVB-T mode and DVD/DVB-T indicator is 
lit. 

A dialogue of first time installation shows on the screen, select 
YES option to perform the first time installation, then select the 
options as mentioned in the dialogue to finish the first time 
installation, select NO option to exit this interface.   
 

LANGUAGE 

Press AUDIO button on the remote repeatedly to select 
preferred audio language by TV programs provided during DVB 
mode.   
 

DISPLAY PROGRAM DETAIL INFORMATION 

Press DISPLAY button during DVB play mode to show the 
program detail information.   
 

ELECTRONIC PROGRAM GUIDE 

Press Program/EPG Button during DVB play mode to skim 
over TV Programs guide.   

Summary of Contents for KDV-310











Reviews: