WPS-encrypted network
WPS-encrypted networks are identified by their network names as soon as the unit starts searching
for available network connection. Select one of the following connection methods:
-
Push button
The radio prompts you to press the connection button on the router, it then scans for a corresponding
network and establishes the connection.
-
Pin (code number)
The radio generates an 8-digit code number. Enter this code number into the wireless router or
access device.
-WPS
Enter the network key for a standard encrypted network.
Note
: Additional information on setting up the WPS-encrypted networks can be obtained in the user
manual of your WPS router.
-
Completion
The radio establishes connection with the selected network.
If connection is failed, the radio returns to the previous display and prompts you to retry.
If an existing network connection is lost, it would automatically attempt to retry for reconnection.
Equaliser
Several preset EQ modes are available: Normal, Flat, Jazz, Rock, Movie, Classic, Pop, News.
In addition, user-defined settings are possible you can set up the equalizer with bass, treble and
loudness according to your personal taste.
Network
-
View settings
You can check the following information on the currently connected network:
Active connection, MAC address, WLAN region, DHCP.SSID, IP address, subnet mask, gateway
address, first and second DNS.
-
WLAN region
Select a WLAN region for optimal WLAN connectivity:
Most of Europe, USA, Canada, Spain, France, Japan, Singapore, Australia, Republic of Korea.
-
Manual settings
Select either a wireless or wired connection and activate/deactivate DHCP.
-
Network profile
The radio stores the last four wireless networks that were connected and attempts each time to
reconnect to one of them. You can view a list of the registered networks. From here you can delete
unwanted networks by turning the
SELECT
control followed by pressing on it to confirm delete.
Language
The default language is English.
To select other languages, rotate the
SELECT
control followed by pressing on it to confirm.
Factory reset
Perform a factory reset returns the unit to factory settings. All manual settings such as time, date,
network configuration and presets are deleted.
The radio's current software version is not affected and remains as it was registered in the
Internet-Radio-Portal. Favourites in the Internet radio remain until newly registered with another
account in the Internet portal.
Software update
Software updates are made available from time to time. You can either check manually or let the radio to
check automatically. If a new software version is found, the radio prompts you to confirm. The new
software will be downloaded and installed upon getting your confirmation. User settings are maintained.
Note: Before downloading software, ensure that the radio is plugged into a stable mains power
connection. Interrupting the mains supply during a software download can lead to functional
disturbances and/or damage to the unit!
Info
Displays the firmware version and the Radio ID
INTERNET RADIO
This radio can play thousands of radio stations and podcasts from all over the world via a broadband
internet connection. When the Internet Radio mode is selected, the radio connects with the Frontier
Silicon Internet radio portal to download a list of stations. Once a station is selected, the radio will
connect directly to that station.
UK-5
Summary of Contents for IR-2002
