LENCO IPD-4500 User Manual Download Page 4

 

Confirm that the 

iPod®/iPhone®

 has been correctly linked to the IPD-4500 system, plug the barrel plug of 

the power supply adapter into the jack marked 

 on the operating panel of the IPD-4500 system, 

and plug the power supply plug into an AC receptacle, and you can begin to use the IPD-4500 system. 

 

Power supply from the rechargeable batteries: 

There  are  four  rechargeable  batteries  built  into  the  IPD-4500  system  that  can  be  charged  and  used 

repeatedly.  If  the  rechargeable  batteries  have  sufficient  charge,  you  can  connect  an 

iPod®/iPhone®

  to 

the IPD-4500 system and begin to use the IPD-4500 system. 

 

 To play 

Slide  the  power  switch 

 on  the  panel  of  the  IPD-4500  system  to  the  farthest  right  “ON” 

position to supply power to the IPD-4500 system. The green indicator light on the switch will turn on. 

Turn on the 

iPod®/iPhone®

, and select and play your favorite music. 

 

 Volume control 

The 

 

keys on the panel of the IPD-4500 system control the volume of the sound system. Press and 

hold  the  "+"  key  to  increase  the  volume,  and  press  and  hold  the  "-"  key  to  turn  down  the  volume.  Each 

time the power is turned back on, the system will automatically set the play volume at around 40% of the 

maximum  volume  to  prevent  too  high  a  volume when  the  unit  is  started  and  to  keep  others  from  being 

disturbed. 

 

 Use of the remote control 

The IPD-4500 system comes with a special remote control which you can use for normal operation of the 

iPod®/iPhone®

 player and IPD-4500 system: 

A.  The  remote  control  is located  in  the  storage  compartment  of  the  IPD-4500  when  it  is  delivered  from 

the  factory  and  can  be  found  by  opening  the  compartment  cover;  for  details  concerning  removing  the 

remote control and storing it in the IPD-4500 system, please read the quick use guide; 

B.  The  features  of  the  special  remote  control  for  the  IPD-4500  system  fully  realize  the  basic  functions 

required for an audio system; it uses one CR2025 button battery as the power supply; see the quick use 

guide for details concerning replacing the battery; 

 

 

1. 

Infrared Transmitter Head  

2. 

:  

3. 

  Previous:  When  playing  songs  with  an 

iPod®/iPhone®

,  press  the 

  key  once  to  jump  to  the 

previous song. Hold down the 

 key for a longer time to rewind the song that is being played. 

4. 

Next:  When  playing songs with an 

iPod®/iPhone®

,  press  the 

  key  once  to  jump  to  the  next       

 

song. Hold down the 

 key for a longer time to fast-forward the song that is being played. 

5. 

  

: Play/Pause

 iPod®/iPhone®

 

6. 

: Volume- 

7. 

Battery compartment cover 

 

 

Summary of Contents for IPD-4500











Reviews: