7
WARNING! Do not expose the chair to an excessively humid environment. If the chair gets wet, remo
-
ve the plug from the outlet and have it checked by an Authorized Service Centre.
WORKING CONDITIONS: WARNING! The chair was not conceived to be used in settings with explosive
atmospheres, in presence of thin powders or corrosive gases, acids, corrosive agents or salt.
Neither it is recommended to use the chair in presence of ionizing and not ionizing radiations (x rays,
lasers, microwaves, ultraviolet rays).
- Not intended to be used in oxygen rich environments.
- Not intended to be used with flammable anesthetics or in conjunction with flammable agents.
STORAGE! For the correct functioning of the electrical equipment the storage of the chair must be at a
temperature between -25° C and +55° C, and only for short periods not exceeding 24 hours, to +70°C.
The chair has no special requirements for storage, provided that it takes place in a closed and dry ro
-
oms; this condition should also be ensured during all phases of transport.
4. PRELIMINARY INSPECTIONS
Before using the chair, please check that:
- the equipment does not present any damage arising from transport or handling; if needed, please
contact the manufacturer Brusaferri & C to solve such inconveniences;
- all packing (carton box, foam, plastic) have been removed;
- the voltage of you cabin is the same as the voltage showed in section 2.6 Power Supply;
- all control devices (electrical or manual) work correctly.
- for the installation, please contact qualified personnel only.
Before using the table for the first time, make sure qualified personnel carry out some tests in safety conditions.
5. DESCRIPTION OF THE CHAIR
Seat
Legrest
Rotation
handle
Headrest
PODO SLINDER
Lever for leg
lowering
Foot pedal
control
Bat
armrests
Back
