LEMEGA DR3, Owner'S Manual

Page: 7 / 13

4.1.3 Now playing information
While a station is playing , the screen shows its name and DLS
( Dynamic Label Segment ) information broadcast by the station such
as programme name , track title and contact details .
Slideshow
The normal now playing screen shows a thumbnail of the currently
available slideshow image . ( If no slideshow image is available a
default DAB thumbnail image is displayed ). The Select button
cycles through the following slideshow displays .
Slideshow image and DLS text being broadcast by the current
station .
Normal now playing screen .
To view further information Press Info .
Each time you press Info , the next set of information is displayed ,
cycling through : DLS text , DL Plus information ( this is only
displayed if broadcast by the station ), programme type ,
ensemble name , channel number / frequency , signal strength , power
status and date .
4.1.4 Other settings
Dynamic range compression ( DRC )
This function reduces the difference between the loudest and
quietest audio being broadcast .
Effectively , this makes quiet sounds comparatively louder , and loud
sounds comparatively quieter .
Note : DRC only works if it is enabled by the broadcaster for a
specific station .
To change the DRC setting Select Menu > DRC > The options
available are : DRC high | low | off .
4.2 FM radio mode
FM radio mode receives analogue radio from the FM band and
displays RDS ( Radio Data System ) information about the station
and show ( where broadcast ).
To enter FM mode: Press Mode until the display shows FM Mode.
4.2.1 Selecting stations
The first time you select FM radio , DR3 is set to the lowest frequency
in the FM band . On subsequent selections the last used
frequency / station is displayed .
To scan for a station in FM mode
Press Select DR 3 scans up through the FM band frequencies ,
showing the current frequency on the screen display .
A scan stops when a signal is found . DR 3 can be set to stop at each
station or only at stations with a strong signal .
Alternatively , you can tune , using the select control button to rotate
in 50 kHz steps .
4.2.2 Now playing information
While FM radio is playing , the screen shows its frequency , or if RDS
information is available , station name and any further
RadioText ' information . If no information is available , just the
frequency and a No RadioText message is shown .
To view further information about the broadcast Press Info.
Each time you press Info , the next set of information is displayed ,
cycling through : RDS Radio text programme type , frequency , name ,
mono / stereo , power status , and date .
10 9