At the bottom of the regulator, remove the
screw. Open and remove the regulator
cover from the back plate.
Find the power supply point to affix the
electronic regulator. Measure the 2 points
of the screw on the back plate of the
regulator. Drill 2 holes on the wall.
Screw the back plate regulator firmly onto
the wall.
Connect the live wire from power supply to
the terminal on the back plate.
Close the regulator cover onto the back
plate, and tighten screw at the bottom.
STEP 13
STEP 14
STEP 15
15
14
15
16
17
13
STEP 16
STEP 17
Installing the electronic regulator
