It is recommended to lay the surface with a
soft material to avoid cracking or damaging
the motor during installation.
Insert the top canopy and lower canopy into
the downrod. Do not tighten the screws yet.
Insert the blue and brown wires from the
fan motor into the downrod until the top of
the downrod.
Insert the silver safety wire from the motor
through the rubberized hole of the downrod
until the top of the downrod.
Connect and attach the downrod shaft onto
the fan motor. Connect the blue and brown
wires into the motor terminal. Please refer
to the wiring and circuit diagram.
Connect the wires to the power supply as
shown in the diagram: Brown wire to the
terminal block 'Live', blue wire to the
terminal block 'Neutral', and yellow or green
wire to the terminal block 'Earth'.
STEP 1
STEP 2
STEP 3
WARNING
:
Electrical works must only be
performed by qualifed personnels. Any
improper installation can cause electric
shock, fire, and safety hazards.
STEP 5
STEP 4
3 & 4
5
Circuit Diagram
3 & 4
1 & 2
