Insert the 2 bolt screws into the downrod
through to the motor shaft. Tighten
securely with the washer. Insert the silver
cotter pins through each bolt, and bend the
ends slightly.
Once all wires and bolts are securely
connected to the motor, tighten the screw
on the lower canopy to the downrod.
Unscrew all screws on the fan motor for
blade installation. Keep the screws safely
aside.
Attach the blade clips onto each sides of
the fan motor. Slot the clips firmly until you
hear the sound 'click'. Then tighten the
screw in the middle of the clip.
Important
: Set the blades with the back
plate facing upwards. Tighten all blades
with the screws set aside earlier in Step 8.
STEP 6
STEP 7
STEP 8
IMPORTANT:
Handle the blades with
caution. Any dent or bend will result in the fan
not functioning properly, uneven wind
distribution or fan wobbling.
STEP 9
6
6
7
8
9
