Page 15/95
21January2021/Version 0
LEM International SA
Chemin des Aulx 8
1228 PLAN-LES-OUATES Switzerland
www.lem.com
2.7. Disclaimer
LEM cannot be held liable for damage, injury or any legal responsibility incurred directly or indirectly
from non product quality issues such as other use of the DCBM than according to LEM written
installation instructions (see section "4. Device description and mechanical integration") or other
external factors.
The user shall observe safe and lawful practices, including, but no limited to, those set forth in this
document. Before any operation or use, please read “Safety” section carefully.
LEM reserves the right to carry out modifications on its product and documentation at the sole
discretion of LEM. Always make sure to have the latest information before placing an order. For up-
to-date product information, visit www.lem.com or contact your nearest LEM sales representative.
2.8. Intellectual Property Rights
© Copyright 2020 LEM INTERNATIONAL SA. All rights reserved.
This document shall not be reproduced, copied, adapted, translated, arranged or modified without
written permission from LEM, and the content, in whole or in any part, shall not be used for any
purpose other than describing LEM DCBM. LEM will retain all intellectual property rights in and
to this document. No license is granted by LEM to any intellectual property right. All rights not
expressly granted are reserved by LEM.
Disassembly, decompilation, reverse-engineering, decryption, or alteration of the DCBM, including
its software, are prohibited.
“LEM” and any related logos are protected trademarks owned by LEM HOLDING SA or trade
names and cannot be used for other purposes than LEM usage without specific prior written
permission.
Unless otherwise expressly granted by LEM in writing, the sale of the DCBM will not confer any
license under any patents, trademarks, trade names, or other proprietary rights owned or controlled
by LEM, its affiliates or suppliers, all rights being reserved.
2.9. Third party licensing
The DCBM includes software developped by SEGGER Microcontroller GmbH (SystemView RTT),
STMicroelectronics (STM32Cube) and ARM LIMITED (CMSIS), available under BSD license, with
following conditions.
Copyright © 2014 - 2020 SEGGER Microcontroller GmbH
Copyright © 2016 STMicroelectronics
Copyright © 2020 ARM LIMITED
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials provided
with the distribution.
Summary of Contents for DCBM 400 Series
Page 95: ......
