LELY Hibiscus 725 CD Classic, Operator'S Manual, Page: 15 / 50

3.3 Move the Hibiscus to the Transport Position
Make sure there are no persons in the area when you move the Hibiscus
to the transport position.
Make sure the front axle weight of the tractor is sufficient (use front
weights if necessary) and that you do not exceed the rear axle weight
when the Hibiscus is in the transport position.
Make sure the PTO shaft does not turn when the Hibiscus is in the
transport position.
Use all lights and warning signals as defined by your local road traffic
regulations.
1. Disengage the PTO.
2. Wait for all moving parts of the Hibiscus to stop.
3. Pull the operating cord to release the locking hooks on the hydraulic ram.
4. Operate the tractor hydraulic system to retract the hydraulic ram until
the Hibiscus is in the transport position.
5. Make sure the locking hooks have engaged in the hydraulic rams.
Figure 5. Make sure the Locking Hooks have Engaged.
WARNING
WARNING
WARNING
CAUTION
Operation 3-3
R-H013-1108EN