LELY Hibiscus 725 CD Classic, Operator'S Manual, Page: 14 / 50

Figure 4. Linkage Pins of the Hibiscus Headstock
3.2 Disconnect the Hibiscus from the Tractor
1. Move the two parking jacks to the bottom position.
2. Install the wheel wedges in front of the transport wheels and behind the
transport wheels.
3. Use the tractor hydraulic system to lower the headstock until the parking
jacks are on the ground.
4. Switch off the tractor engine.
5. Disconnect the Hibiscus PTO shaft from the tractor PTO.
6. Attach the PTO shaft to the mount provided.
7. Release the pressure from the tractor hydraulic system.
8. Disconnect the hydraulic hoses from the tractor hydraulic system.
9. Install the dust caps on the hydraulic hoses.
10. Attach the hydraulic hoses to the support on the headstock.
11. Disconnect the stabilization chains (or rods) from the lower arms of the
tractor.
12. Disconnect the lighting electrical cable from the tractor.
13. Disconnect the two lower arms from the linkage pins on the headstock.
14. Remove the control cord for the ram lock from the tractor cab.
15. Remove the tractor from the area.
3-2 Operation
R-H013-1108EN