LELY HIBISCUS 1015 Profi, Operator'S Manual

Page: 16 / 24

E-14
7 MAINTENANCE
• Correct machine servicing is necessary with a view to
reliable and safe working.
7.1
Maintenance after operations
- Clean the machine thoroughly.
- Grease the machine with a rust preventive.
- Grease the piston rods with an anti-corrosion agent if a longer
period of inactivity is anticipated.
Remove the agent when putting the machine back into operation.
If not, sealing of the rams may be affected after hardening of the
anti-corrosion agent.
7.2
Lubrication
- PTO shafts to be greased every 8 working hours by the grease
nipples on the cross assemblies, protection tubes and slip clutch
(fig. 13).
- Profiled tubes of the PTO shaft to be greased every 8 working
hours (fig. 13).
- Gears in the gearbox over the rotor to be greased every 8 working
hours (fig. 14). When greasing, keep turning the rotor bit by bit
ensuring effective distribution of grease all over the gears.
13
8h
8h
14
8h
!