Pag. 5
PA71N
English
COMPONENTS:
1.
Pedal
2.
On/off switch
3.
Boiler support
4.
Catch tray
5.
Handle
6.
Legs
7.
Working surface cover
8.
Motor
9.
Socket with safety door
10.
Blowing/vacuum switch
USER INSTRUCTIONS:
1.
Unfolding: Hold the ironing board in a vertical position with the tip downwards; press the handle (5)
placed underneath the board and lift up the working surface by pulling with the foot outwards until the
desired height is reached.
2.
Unfold the boiler support (3) and place the steam generator on the shelf.
3.
Insert the electrical plug into an electrical outlet.
4.
Insert the iron plug into the socket with safety door (9) placed under the control box.
5.
Place the pedal (1) near the working area.
6.
Push the on/off switch (2) on the “I” position.
7.
Wait for a few minutes until the working surface is warmed up.
8.
Start ironing.
9.
Push the blowing/vacuum switch (10) as follows:
-
I: blowing function;
-
0: the pedal stops working;
-
II: vacuum function .
10.
Set in action the blowing or vacuum function (see point 9) by pushing the pedal (1) both to eliminate the
steam from the garment and to fit the garment on the board easier.
11.
At the end of the ironing we suggest you leave the on/off switch (2) on for a few minutes to ensure the
inside of the table is dry and free of condensation.
12.
Folding: turn the on/off switch (2) off, remove the plug from the outlet. Take the boiler and the iron off
of the boiler support (3), fold the boiler support (3), and make sure there is no garment on the working
surface and/or on the catch tray (4).
13.
As soon as the working surface is cool, position the ironing board vertically with the tip downwards, press
the handle (5) placed under the working surface and at the same time pull the legs (6) inward.
MAINTENANCE:
We suggest checking the ironing board cover (7) periodically and, if it is necessary, replacing it with an original
one (code PA019).
TECHNICAL DATA:
Voltage: 220V – 230V - 50 Hz
Working power: 650 W
Power of heating element: 600 W
Max. power to apply to the socket: 2350W
Working surface: cm 125 x 40
The inserted data and pictures can be subject to changes without previous notice for the improvement of the
machine’s performances.
Summary of Contents for PA173
