3
6
When the remote control box is in set up model, press the key 6 of
the valid hand set, after hearing "dudu", then this hand set and the
remote control box are locked. Press the key 6 of this hand set
again to unlock it.
Press the setup key 1 of the remote control box for more then 9
seconds till to hear a sound "du-------", then the hand set is invalid
from this remote control box.
By repeating the above step 2, you can sent more then one set of
hand set to match with one remote control box.
1(SETUP KEY)
4(DOWN)
3(STOP)
2(UP)
5(UP)
6(STOP)
7(DOWN)
8(INNER KEY)
4.
5.
6.
HAND SET
REMOTE CONTROL BOX
fix the screen to the wall.
fix the screen to the ceiling.
OPERATING INSTRUCTION
Unpack the screen carefully, be sure the screen is in good condition,
check all the accessories are packed inside the carton.
Check the voltage and frequency marked on the screen is in
accordance with the local power supply. It is suggested only to use
the screens indoor under normal temperature and humidity.
Refer the fig below to fix the screen to the wall or to the ceiling.
Plug in the power supply. Press the down button of the switch box or
the hand set, the screen will go down smoothly. Press the stop button
when the screen goes down to the expected position, otherwise the
screen will stop at the lower limited position automatically.
1
2
3
4
5 Press the up button of the switch or the
hand set, the screen will go up smoothly.
Press the stop button when the screen
goes up to the expected position,
otherwise the screen will roll back to the
housing.
Cut off the power supply when the
screen won't be used for long time.
Don not pull the control wires to avoid
disconnection and dangers.
1.
2.
3.
Press down the set up key 1 of the remote control box (or the inner
key 8 of the hand set) one time, you will hear the sound "du-du--".
Then the remote control box is in set up model.
When the remote control box is in set up model, press the key 2 of
the remote control box, after hearing the "du-du--", press any key of
the invalid hand set, after hearing "du---- " then this hand set is
matched with the remote control box .
When the remote control box is in set up model, press the key 7 of
the valid hand set or key 4 of the remote control box , after hearing
the "du----du-----" the up and down key function of the hand set and
remote control box is exchanged.
Summary of Contents for 81214
Page 1: ...TUBULAR MOTOR ...
