21
20
Jordaan 3-Speed
Assembly & Maintenance Guide
05. Fitting the pedals
To assemble the pedals, you will need a 15mm open-
ended spanner. Insert the pedal into the crank and
ensure the pedals are properly tightened.
LEFT pedal: this is the pedal that has indented hori-
zontal lines on the small part between the pedal and
thread.
RIGHT pedal: This pedal has no indented lines and is
smooth in between the pedal and thread
ATTENTION: please make sure you check the thread
direction before inserting the pedals. Fitting the pe-
dal to the wrong side can damage the crank arm and
is not covered under warranty.
