MANUAL LEKKER BIKES / E-Amsterdam 2nd Gen
13
MANUAL LEKKER BIKES / E-Amsterdam 2nd Gen
14
CHAPTER 4
Adjusting gears and final
checks
13.
To attach the front and rear lights and operate them you
will need a
5 mm allen key
and a
phillips head screwdriver
.
Firstly you will need to make sure the lights are
mounted
onto the bike. The front light is mounted on the
front of the
fork
just below the steer tube. To attach the light, you will
need to
loosen
the 5mm allen key bolt until it comes out.
Once out,
insert
the bolt through the
metal mounting point
under the light and thread the bolt back onto the fork.
Make
sure
that the cable for the light is
away
from the front wheel
once mounted to reduce the chance of the cable getting
caught in the front wheel while being ridden.
US ONLY:
To
attach
the rear light simply slide the light’s mounting collar
on to the seat post and tighten with a
phillips head
screwdriver.
To operate the lights, make sure the
battery is charged
and
in the bike. Power up the bike, once the control screen has
turned on hold down the
plus (+) button
for 2 seconds to
turn on both the front and rear lights. To turn off the lights
hold down the plus (+) button for 2 seconds and the
lights
will switch off.
IMAGES
Chapter 4
8.1
8.2
8
9
8.3
10
