MANUAL LEKKER BIKES / E-Amsterdam 2nd Gen
19
CHAPTER 5
Turning on your E-
Amsterdam and charging
16.
You are now ready to ride your
E-AMS!!!
Please
remember to regularly
check your pedals
and all bolts
are correctly tightened, and to service your bike regularly
so you can enjoy it for many years to come!
The Cla
ss Of
MANUAL LEKKER BIKES / E-Amsterdam 2nd Gen
CHAPTER 5
Turning on your E-Amsterdam
and charging
We know you are excited to try your E-AMS for the first time!
You‘re nearly there, just a few more steps before it’s ready to
go!
14.
Before
turning
on your
E-AMS
, we recommend doing this
whilst sitting on the bike, this allows full control over the bike
and can avoid accidents. To turn your E-AMS on, using the
control module found on the left hand side of your bar,
press
the power button
for a few seconds to turn on your screen,
once turned on, you can then cycle through the assist modes
using the arrow buttons on the control module. For more in-
depth instructions for your screen, please refer to the
manufacturer's manual,
found in PDF format online.
PLEASE
NOTE:
We recommend always using assist level 1 for starting,
as this will allow better control of the bike.
15.
All batteries will come with
some charge
, to get the most
out of your battery, you may need to
charge it
before your
first ride. We recommend that for the first three charges, to
charge it for
12hr cycles
,
PLEASE NOTE:
this will allow the
battery to have full charge capacity.
20
14
14.1
