
5
3.
SET VIEW / FUNCTION ELEMENTS
1
.
Function switch
Position Information
OFF
Device is switched off
PROG Entering of calling numbers, calling number sequence, PIN-Code and further parameters
ON
Device is in
supervision mode
2
.
Selection switch
EasyAlarm®
monitors the emergency buttons on all three positions (I/ II/ III). Additionally an acoustical
supervision (noise activity) can be activated according to section 6.6. Doing so, the
selection switch
is also used
to select the level of noise sensitivity:
Position Monitoring functions (Function switch on position ON)
I
Low sensitivity => Alarm is triggered when noise level is exceeded frequently during a longer
period
II Medium
sensitivity
III
High sensitivity => Alarm is triggered if noise level is exceeded two or three times within a short
period
3
.
Keypad
When
function switch
is on position PROG, you can enter the calling numbers or do further programming. If
function switch
is on position ON pressing any key will start a
test call.
Keys are marked with
1
2
3
4
5
6
7
8
9
*
0
#
in the following sections.
4
.
Loudspeaker
The integrated loudspeaker is used for voice guidance during the programming as well as for hands-free
communication during
phone connection
.
5
.
Microphone
Is used during
hands-free connection
and for recording of
individual message
.
6
.
LED
Status of LED
Operation mode
Green
Waiting period
Green brief flashing every 4 seconds, also if acoustical
monitoring is active by exceed set noise level
Supervision mode activated
Green is on and off for 4 seconds alternatively Supervision
mode
deactivated
Orange
Phone connection
7
.
Battery compartment
The 9V-battery is used as a backup during power failure.
Please note: The telephone cord must be disconnected before opening the battery
compartment because otherwise you can get in contact with the telecommunication
voltage!
8
.
Telephone jack (
-LINE)
The plug must be locked in the jack. To disconnect press pawl.
9
.
External port (
EXT/
≂
)
for accessories (as motion sensor) and power supply.
6
1
5
4
3
2
-LIN
E
EX
T/
~
7
9
8