manualshive.com logo in svg

Leitch DMX-3901-A, Installation And Operation Manual, Page: 7 / 64

Share
Download
Leitch DMX-3901-A Installation And Operation Manual Download Page 7

iv

DMX-3901-A Installation and Operation Manual

  

Contents

Setting Jumpers  ....................................................................................... 9
Upgrading DMX-3901-A Firmware  ..................................................... 10

Upgrading the Firmware (Discovery Method) ............................... 10
Upgrading the Firmware (Drag-and-Drop Method)  ...................... 12

Correcting a Failed Upgrading Procedure ............................................. 14

Setting the Module to Fail-Safe Loader Mode ............................... 14
Upgrading the Firmware in Fail-Safe Mode  .................................. 14
Rebooting the Module .................................................................... 16

Chapter 3: Operation

Overview ............................................................................................... 17
Operation Notes ..................................................................................... 18
Cross-Functional Parameter Changes  ................................................... 19
Navigating the Operator and All Lists  .................................................. 21
Operator and All List Parameters .......................................................... 22
Setup Parameters  ................................................................................... 25
Alarms ................................................................................................... 26

Alarm Synchronization  .................................................................. 26
Identifying the Cause of an Alarm ................................................. 26
Enabling or Disabling an Alarm Parameter  ................................... 27
Restoring Default Settings  ............................................................. 27

State Recovery Parameter Availability  ................................................. 28
LEDs and Module Indicators  ................................................................ 29

General Information ....................................................................... 29
Card-Edge Locations ...................................................................... 30
LED Descriptions ........................................................................... 31
Module Indicator Descriptions ....................................................... 32

Chapter 4: Specifications

Overview ............................................................................................... 33
Input ...................................................................................................... 34

SDI Video  ...................................................................................... 34

Output .................................................................................................... 35

Analog Audio (Balanced)  .............................................................. 35
 SDI Video  ..................................................................................... 35

Miscellaneous ........................................................................................ 36

Module Start-Up  ............................................................................ 36
Power Consumption ....................................................................... 36

Summary of Contents for DMX-3901-A

































































Reviews:

No comments