5
1. Make sure the kettle is fully unfolded, and the handle is
locked into place.
2. Open the lid by turning it counter-clockwise
3. Fill the kettle with the desired amount of water. Do not fill
more than the maximum amount (0.5L). Too little water will
result in the kettle switching off before the water has boiled.
4. Close the lid, and turn the lid clockwise to lock the lid
5. Connect the kettle to your mains power and set the switch
to “-”
(see Figure 2)
, which will allow the kettle to start
boiling and the indicator light will switch on.
(Note: The switch will be set to “o” as default)
Before using the foldable kettle for the first time, we recommend that you clean the kettle
by boiling at full capacity 0.5L twice and ensure that the water is safely discarded.
This kettle features a space saving designed and will be collapsed/folded when packed.
Folding/Unfolding the Kettle
On First Use
Operating Instructions
Unfolding The Kettle
1. To unfold the kettle, simply pull up the
silicone body.
2. Then, unfold the kettle’s handle and position it
into the handle support clip, making sure that
it locks into place. This will provide you with a
strong and sturdy hold.
(See Figure 1)
Please note, if the handle is NOT correctly locked
into place, then the appliance will not operate.
Unfolding The Kettle
1. To fold the kettle, first make sure the kettle is empty and is disconnected from the mains
power supply.
2. Press the release button on the handle and release the handle lock at the same time to
unclip the handle so that it can be folded downwards.
3. Then, push the silicone body until the kettle is fully folded inwards.
Fig. 1
Fig. 2
