Leisure Temp LT1000, Operation Manual

Page: 6 / 45

Page - 3
1 - Operation
IN THIS SECTION:
1.1 Wake Up Heat Pump 3
1.2 Display Panel 3
1.3 Activate Heat Mode, or Deactivate Equipment 5
1.4 Set Temperature 6
1.5 Set Up Programming 6
1.5.a Setting Date and Time 6
1.5.b Using Entry Code to Access Heat Pump 8
1.5.c Setting Entry Code Option 8
1.5.d Disabling Entry Code Option 10
1.6 External Equipment 11
1.6.a Operating Heat Pump with a Call Flex 11
1.6.b Operating Heat Pump (With an External Controller) 14
1.6.c Operating Heat Pump (With an External Flow Switch) 14
1.6.d Operating Heat Pump (With a Gas Back-Up) 14
1.6.e Operating Multiple Connected Heat Pumps 17
1.1 Wake Up Heat Pump
The display's backlight will be off when the heat pump is in
sleep mode. To wake up the heat pump, slowly slide a finger
across the buttons.
l
The display will illuminate.
l
The message "KEYPAD UNLOCKED" will briefly appear.
l
Then the water temperature and mode will display.
1.2 Display Panel
Display Panel
The following information outlines the operation for a standard installation.
l
Control Buttons will operate differently for custom installations; such as
when a heat pump is connected to an external controller or multiple heat pump
configuration.
l
See " Operating Heat Pump (With an External Controller) " on page 14.
l
See " Operating Multiple Connected Heat Pumps " on page 17.
1
-
O
pe
ra
ti
on