manualshive.com logo in svg

Leister WELDPLAST 600, Manual, Page: 35 / 40

Share
Download
Leister WELDPLAST 600 Manual Download Page 35

35

9.9 Info Mode

9.10 Duty Info

Switched off at the factory

•  If Info Mode is activated, additional information is displayed at the work level.

The following information is displayed:
•  Speed plastic motor in rpm
•  Blower heating; capacity of heating output in % as well as ACTUAL and TARGET 

temperature in °C

•  Heating plastic A; capacity of heating output in % as well as ACTUAL and TAR-

GET temperature in °C

•  Heating plastic B; capacity utilization in % as well as ACTUAL and TARGET 

temperature in °C

•  In the menu by pressing the 

Minus button (32)

 

Select Info Mode menu item

•  by subsequently pressing the 

Confirm button (33)

, 

activate Info Mode.

•  Select the 

Duty Info

 menu item in the menu by 

pressing the 

Minus button (32),

 then press the 

Confirm (33) button

 

The runtimes of the machine, the drive and the blower 

are displayed.

9.11 General Info

•  Select the 

General Info

 menu item in the menu 

by pressing the 

Minus button (32),

 then press the 

Confirm (33) button

 

The following information is displayed:
•  Software version HMI and PCU
•  production date of the extruder 
•  serial number

Summary of Contents for WELDPLAST 600









































Reviews:

No comments