19
8.4 Display symbols of the status display (Display 40)
The Status display is subdivided into a left-hand (1) and a right-hand area (2).
Warning present
Data recording
Overvoltage
Eco mode
GPS data reception
Undervoltage
Heating
WLAN
Stop Device on Alert
switched on
• during the welding process, plastic extrusion can be adjusted at any time using
the
potentiometer (18)
• between 60 and 100% to adjust other parameters during the welding process,
press the
Minus/Plus button (32) to select the parameters to be adjusted
• Press the
Confirm button (33)
• then set the desired target value with the
Minus/Plus button (32)
• without further input, the cursor automatically switches back to the temperature symbol
Status display 1/Left
Profile name
Displays the name of the selected currently valid welding profile (such as Basic). If
a profile name contains more than 6 characters, the first 6 characters are shown
first, one after the other, followed by the remaining 6 characters. The system
presents the first 6 characters afterwards.
Voltage
Display of the supply voltage
Status display 2/Right