5
USAGE
Welding-Pen
Function of heat protection Welding-Pen A
• Heating element switches off automatically if there is no or not sufficient air flow
(temperature >600 °C)
Function of heat protection Welding-Pen S
• Heating element switches off automatically if there is no air flow.
• If there is not sufficient air flow, power will be electronically reduced and the
temperature keeps steady at about 600°C. If the air flow falls below a certain
value, the heating switches off automatically.
• Disconnect tool from the mains. There is an automatic reset of the circuit board
after 5 seconds.
• Check air flow
• Check hose connections
• Increase air flow
• Connect tool to the mains
• Only use LEISTER accessories
• LEISTER air flow adjuster
• PVC air hose
• Hose clamp for air hose
• Tubular nozzle ø 5 mm
• Draw nozzles with tacking tip for: rod ø 3 mm
rod ø 4 mm
profiled rod 90 – 5.7 mm
Accessories
Measurements when protection of heating element has been activated
ATTENTION! Do not operate tool without air supply!
