OPERATION
Overlap 80/100/120 mm
LEISTER Varimat V
WELDING PARAMETERS Overlap 80/100/120 mm
LEISTER Varimat V
Operating condition
• Attach the
guide bar (26/27)
.
• Hang strain relief of
mains cable (1)
in the
cable holder (29)
.
• Adjust the
guide bar (27)
with the
clamping lever (28)
to the desired height
• Check the basic setting of the
welding nozzle (9).
(ex works detail A and C).
• Transport setting:
– Swivel the
guide roller (18)
upwards.
– Release the
transport roller (16)
by lifting up with
the guide bar (27)
.
– Push the
transport roller (16)
by applying a little pressure to
the shift spring (19)
to the left until it stops (illustration B).
– Position the
hot air blower (8)
by pulling the
locking lever (11)
and swivel it up
until it locks.
• The basic adjustment of the
welding nozzle (9)
is done at the factory (Illustration A and C)
• Connect the tool to the mains.
The voltage rating stated on the tool should
correspond to the mains voltage.
Illustration
B
Illustration
C
1–
2 m
m
70 – 85mm
18
16
12
9
2
22
19
140 N
175 N
210 N
Illustration H
12
23
Welding pressure
• The welding pressure is transmitted to the
pendulum action roller (12)
.
• As necessary, the
additional weights (22)
and the
end weight (23)
can be put on
(see illustration H).
Illustration A
9
1 – 2 mm
