9
Leister VARIMAT S
Hot air welder
Application
• Overlap welding of roofing membranes made of PVC, TPO, ECB, EPDM and PE at edge regions.
• Overlap welding of films and coated fabrics.
• Welding seam width 40 mm (1.6 inches).
Please read operating instructions carefully before use
and keep for future reference.
Operating Instructions
(Translation of the original operating instructions)
GB
USA
Rated voltage
stated on the device must correspond to line/mains voltage.
N 61000-3-11; Z
max
= 0.115 Ω + j 0.072 Ω. If necessary, consultate supply
authority.
In the case of
line/mains power failure
extract hot air blower.
Danger to life
when opening the device as live components and connections are
exposed. Unplug the line/mains plug from the plug socket before opening the device.
For personal protection, we strongly recommend the tool be connected to an
RCCB
(
R
esidual
C
urrent
C
ircuit
B
reaker) before using it on construction sites.
FI
Incorrect use of the hot air tool can present a
fire and explosion hazard
especially near combustable materials and explosive gases.
The tool must be operated
under supervision.
Heat can ignite flammable materials which are not in view.
The device machine may only be used by
qualified specialists
or under their super-
vision. Children are not authorized to use this device.
230
400
Warning
Caution
Do not touch
hot welding nozzle, they can cause
burns
. Allow the tool to cool
down. Do not point the hot air flow in direction of people or animals.
Connect tool to a
receptacle with protective earth terminal
. Any interruption of
the protective earth conductor inside or outside the tool is dangerous!
Use only extension cables/cords with protective earth conductor !
Protect the device
from damp and wet.
