35
Seam Name
Press the
Minus (32)
button to select the Seam Name
and then press the
Confirm (33)
button.
To adjust the name, press the
Confirm (33)
button.
Use the
Minus/Plus (32)
button to select characters or
digits and accept with the
Confirm (33)
button.
Line change with the buttons
drive (30)
or
heating (31).
To save the selected name and exit the character
editor, select the check mark and then accept it with
the
Confirm (33)
button.
Rec. Interval
Select the Rec. menu item in the menu by pressing
the
Minus (32)
button interval. Then press the
Confirm
(33)
button.
Use the
Minus/Plus (32)
button to set the value for the
recording interval. Pressing the
Confirm (33)
button
accepts the set value.
Seam Naming
Press the
Minus (32)
button to select Seam Naming
and then press the
Confirm (33)
button.
Summary of Contents for UNIROOF 300
