Leister MONO 6 SYSTEM, Operating Instructions Manual

Page: 15 / 24

15
Voltage V~ 120 230
Power consumption W 250
Frequency Hz 50 / 60
Air volume max. (20 °C) l/min. 250 – 600
Max. air inlet temperature °C 65
Max. static pressure kPa 3.5
Emission level L
pA
(dB) 65
Weight kg 1.0
Size Page 3
Mark of conformity
Approval mark
Protection class II
Technical data MONO 6 SYSTEM
Relay output
Max. voltages AC 250 V, DC 30 V
Max. currents AC 3 A, DC 3 A
Max. contact resistance 100 m Ohm bei DC 6 V / 1 A
Type of contact SPST - NO
Insulation IEC/EN 60065 AC 2000 V (50 - 60 Hz) 1 min
Technical data for interface
Setpoint setting
e-Drive or
interface
e-Drive 1 – 100 %
External interface 1 – 100 %
Signal inputs
with reverse polarity
protection and
zero off set
Insulation IEC/EN 60747-5-2 AC 1414 V Peak
Voltage input Uc in relation
to GND iso
DC 0 - 10 V
Max. input voltage DC 12 V
Nominal input resistance 7.9 kOhm
Current input Ic (2 - conductor
technology)
DC 4…20 mA
Max. input current DC 22 mA
Nominal input resistance 168 Ohm
Device function
• Adjustable air volume • Brushless motor
• Compact and effi cient • Tool protection
• “e-Drive” operating unit • System interface
Technical data and specifi cations are subject to change without prior notice