background image

Operation

• Connect tool to the mains.
• The mains connection cable should have the corresponding cross section area

of conductor and should be fitted by a specialist.

• As required, push-fit appropriate nozzle or reflector (see caution).
• Make sure that the hot air can flow freely as otherwise back pressure could da-

mage the tool (fire hazard).

• The LEISTER Company, as well as the authorized Sales and Service Centres, offer

advice and an introduction to the areas of application of hot air tools, free of
charge (see page 1).

• After use, allow the tool to cool down by letting cold air flow through it (pre-

venting warm air back pressure).

CAUTION:

To protect the tool as well as the element, the minimum air flow (see page 2)
must in no way be impeded through nozzles or reflectors.

The mains connection should have a suitable 

double pole isolator

with a 

3 mm

distance between contacts.

• Only LEISTER accessories should be used.
• Let the tool cool down before changing the nozzle or reflector.

• Repairs have to be carried out by authorised 

LEISTER Service Centres 

only. They

guarantee a specialized and reliable 

repair service within 24 hours

using original

LEISTER spare parts.

• Guarantee and liability are in accordance with the guarantee certificate as well

as with the currently valid general business and sales conditions.

• LEISTER Process Technologies rejects any guarantee claims for tools which are not

in their original condition. The tools must never be altered or changed.

Technical data and specifications are subject to change without prior notice.

Your authorized Service Centre is:

GUARANTEE AND LIABILITY

SERVICE AND REPAIR

ACCESSORIES

4

BA LE 40 000 without electronics / 01.2004

LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland

Tel. + 41 41 662 74 74   Fax + 41 41 662 74 16    

www.leister.com     [email protected]

®

Summary of Contents for LE 40 000

Page 1: ...d moulded parts Heating conveyor ovens or heat tunnels Activating and loosening solvent free adhesives and melt adhesives Sterilizing packaging materials such as bottles corks and containers Separating and fusing synthethic fibres and fabrics Soldering processes on thin metal parts Speeding up mixing processes and dissolving foams which can arise during mixing and filling operations Removing plast...

Page 2: ...0 80 80 13 2 13 2 447 x 312 x 306 2 WARNING CAUTION TECHNICAL DATA The equipment should not be operated without supervision Danger When opening up the tool live components and connections are exposed Therefore before open ing it unplug the tool to ensure disconnection from the mains Incorrect installation and use of hot air tools can present a fire and explosion hazard The specified minimum air fl...

Page 3: ...air flow fall below the minimum the mains must be disconnected at the same time LEISTER blowers must be used for the air supply pay attention to the direction of rotation and the electrical connection For use in a dusty environment the tool should be fitted with a LEISTER stainless steel filter on the air intake connection Where a particularly critical dust pro blem exists eg metal electrically ch...

Page 4: ...ble double pole isolator with a 3 mm distance between contacts Only LEISTER accessories should be used Let the tool cool down before changing the nozzle or reflector Repairs have to be carried out by authorised LEISTER Service Centres only They guarantee a specialized and reliable repair service within 24 hours using original LEISTER spare parts Guarantee and liability are in accordance with the g...

Reviews: