Leister HEMTEK K-ST, Operating Instructions Manual, Page: 8 / 18

23
• Mount table fastening on table using
enclosed socket head bolts
(Check stability.)
• Position HEMTEK ST / K-ST on table fas-
tening. Make sure that the machine is
mounted parallelly to table fastening.
• Tighten the HEMTEK ST / K-ST using the 4
socket head bolts
• Check correct seating and stability of the
welder.
Mount HEMTEK ST / K-ST on table fastening
Clamping feet can be adjusted to the differ-
ent tables using the two socket
head screws.
Two persons are required to transport the welder.
Use only stable tables or workbenches that can support the load without tipping over.
Set table fastening
2 x socket head screws per foot
5. Settings on the HEMTEK ST / K-ST
5.1 Setting and assembling table fastening