25
Shifting the weight grip can be used to
adjust the effective load of the contract
pressure wheel. Shifting the mass down-
wards reduces the contact pressure, shifting
it upwards increases it.
Contact pressure in position shown approx.
150 N.
+
-
Risk of burning!
Do not touch heating element tube and nozzle when they are hot. The device should always first be
allowed to cool down!
The following is the basic setting of the welding nozzles of your HEMTEK ST
B
C
A
A
22 mm Distance of nozzle to drive axle
B
1 mm Nozzle transition
C
1 mm Height offset
A
26 mm Distance to drive axis
B
2 mm Nozzle overlap
C
1 mm Height offset
The following is the basic setting of the welding nozzles of your HEMTEK K-ST.
5.4 Adjusting the contact pressure weight
5.5 Welding
nozzle
Summary of Contents for HEMTEK K-ST
Page 17: ......