Leister AIRSTREAM ST, Operating Instructions Manual

Page: 11 / 80

11
The AIRSTREAM ST blower is designed for professional applications to supply
air to air-powered LEISTER tools such as Diode S/PID, Welding Pen S/R and
Labor S (with terminal box).
Use only original Leister spare parts and accessories because otherwise no
warranty or guarantee claims can be asserted.
Any other use or any use beyond that described is deemed as improper use.
2. Technical data
AIRSTREAM ST
230 V
Nominal voltage V~ 230
Nominal voltage W 215
Frequency Hz 50
Air volume l/min 200 (total)
Emission level L
pA
(dB) < 48
Dimensions (L × W × H) mm
600 (without power cord) × 250 × 362 (H with handle)
Weight kg
24
Static pressure kPa 25
Mark of conformity
Protection class I
Subject to change without prior notice.
1.1 Intended Use
1.2 Improper Use
3. Transport
Never store flammable materials
(e.g. plastic, wood or paper) on the blower!
Comply with applicable national statutes regarding the carrying or lifting of loads.
The weight of your AIRSTREAM ST without transport box is 24 kg.
Two persons are required for transportation with the transport box.
Use only the attached carrying handle (2) for transporting the blower.
Never use the
carrying handle (2)
on the
device for transporting with a crane!
To lift the blower by hand, use the carrying
handle (2).
2