Leister Airpack, Operating Instructions Manual

Page: 16 / 116

16
Installation declaration
(Pursuant to EC Machinery Directive 2006/42; Appendix II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares that the
incomplete machine
Designation:
Blowers
Model: ROBUST
– insofar as is possible with respect to the scope of delivery – is in compliance with applicable basic requirements
of the EC Machinery Directive (2006/42/EC).
The incomplete machine is furthermore in compliance with the requirements of the following EC Directive(s):
EC Guideline(s): 2014/30, 2014/35, 2011/65
Harmonized standards: EN 12100, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, EN 62233,
EN 60335-1, EN 60335-2-45, EN 50581
Furthermore, we declare that the special technical documents according to Annex VII (Part B) were prepared for
these incomplete machines, and we agree to transmit them electronically to the market surveillance authorities
upon justified request.
Name of authorized representative for documentation: Volker Pohl, Manager Product Conformity
Commissioning of the incomplete machine is forbidden until it has been determined if need be that the machine
in which the incomplete machine has been installed complies with the stipulations of the EC Machinery Directive
(2006/42).
Kaegiswil, 5/22/2018
Bruno von Wyl, CTO Christoph Baumgartner, GM
Installation declaration
(Pursuant to EC Machinery Directive 2006/42; Appendix II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares that the
incomplete machine
Designation: Blowers
Model: AIRPACK
– insofar as is possible with respect to the scope of delivery – is in compliance with applicable basic requirements
of the EC Machinery Directive (2006/42/EC).
The incomplete machine is furthermore in compliance with the requirements of the following EC Directive(s):
EC Guideline(s): 2014/30, 2014/35, 2011/65
Harmonized standards: EN 12100, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, EN 62233,
EN 60335-2-80, EN 50581
Furthermore, we declare that the special technical documents according to Annex VII (Part B) were prepared for
these incomplete machines, and we agree to transmit them electronically to the market surveillance authorities
upon justified request.
Name of authorized representative for documentation: Volker Pohl, Manager Product Conformity
Commissioning of the incomplete machine is forbidden until it has been determined if need be that the machine
in which the incomplete machine has been installed complies with the stipulations of the EC Machinery Directive
(2006/42).
Kaegiswil, 5/22/2018
Bruno von Wyl, CTO Christoph Baumgartner, GM
Disposal
Electrical equipment, accessories and packagings should be subjected to environmentally friendly
recycling.
For EU countries only: Do not dispose of electrical equipment with household refuse!