Leidos Dynetics Human Landing System, Instructions Manual

Page: 8 / 40

8
There are 21 Dynetics HLS parts, plus 16 printed alignment
dowels.
Several elements have been split into multiple parts to simplify
the printing steps.
Depending on your printer, it is possible to set up a single print
that creates several parts at once. For example, all 16 printed
alignment dowels can be arranged into one print.
Similar parts can be printed in pairs when two are needed, since
the settings for those parts are the same.
The red, blue, gold, and teal colored parts in the expanded view
shown here can generally be printed with the same settings.
The following steps will guide you through printing each
element of the Dynetics HLS.
Overview of Parts