Leidos Dynetics Human Landing System, Instructions Manual

Page: 6 / 40

6
Material
This model prints best using quality PLA filament, such as
Prusament, Taulman, ColorFabb, and Paramount. Other filament
brands that have also been successfully used include eSun,
HATCHBOX, SUNLU, and AmazonBasics.
PETG is also a viable material, though slightly more challenging.
The printed models shown here are printed in several colors of
PETG.
All model parts are assembled using small amounts of
cyanoacrylate (CA) glue or super-glue.
NOTE: If children will be involved, substitute a child-safe glue.
Print Settings
(Use these settings unless otherwise noted)
Recommended:
• 0.4 mm or smaller nozzle
• 3 perimeter layers
• 30% rectilinear or cubic infill
• Printed with supports
These settings should work on a wide variety of fused filament
printers (e.g. Creality, Prusa, Ultimaker).
The colorful model (shown at bottom on page 7) is printed at
50% model scale. Smaller prints will be especially challenging on
a fused filament printer due to feature size.
A 100% model scale gray model (shown at top on page 7) will fit
within the print volume of a Prusa i3 MK3s, the printer used to
make the models shown here.
MaterialS and
Print Settings