Start-up
1.
Check which stage adapter is in place. If you need to change the stage
adapter, do it
before
you start the microscope.
The adapter on the left is meant for 96/24 wellplates and 3D-printed
sample holders. The adapter on the right is meant for regular objective
glasses and 35 mm dishes. If you are working with incubation, remember
to pluck the holes on the adapter using spare objective glasses / dishes
found next to the microscope.
2.
Turn on the microscope and the laser by
pressing the two buttons on the large black
box left of the microscope. Also turn on the
fluorescent lamp.
You cannot see the switches, but you can
feel the above the key. You do not need to
touch the key unless it is not in the position
shown here.
