6
Rugby 100-1.5.0en
Buttons
Buttons
Off/On Power Button
Turns the unit on, off and
changes head speeds
• Press the Off/On Power Button
once to turn on the Rugby 100 at
10 rps.
• Press the Off/On Power Button a
second time to decrease the head
speed to 5 rps.
• Press the Off/On Power Button a
third time to turn the Rugby 100 off.
When power is applied to the
Rugby 100, it will always start up in
automatic mode at 10 rps head speed,
and with the H.I. Alert function turned
on.
)
Units below Serial Number 100-
28500 turn on at 5 rps.
Automatic/Manual Button
Switches the unit between
automatic self-leveling mode,
and manual mode.
• The Manual Mode Indicator will
flash when in this mode.
Manual Grade Buttons (2)
This set of two red buttons
controls the tilt of the main axis
when the Rugby 100 is in
manual mode.
• In manual mode the arrow buttons
allow the operator to tilt the head to
match an existing line or slope.
• When facing the switch panel and
the up arrow is pressed, the plane
of laser light will tilt upwards as it
moves away from the operator.
• Pressing the arrow buttons will
move the head in small increments.
Pressing and holding the button
move the head more quickly.
Rugby100-2 main_axis.eps
Main Axis Manual Grade
H.I. Alert, also called
Height of Instrument or
Elevation Alert
, when
activated will reduce the
amount of self-leveling range to
prevent elevation errors as a result of
movement of the tripod or other
sudden movement.
The H.I. Alert function will
automatically turn on when the Rugby
100 is powered up. All three LED's will
flash twice to indicate that the
Automatic H.I. Function is enabled.
Thirty seconds after the Rugby has
leveled, the H.I. function will become
active. All three LED's will flash once to
indicate that the function has been
activated.
If the Rugby is disturbed and an alert
condition exists, all three LED
indicators will flash simultaneously
(5 Hz).
