manualshive.com logo in svg

Leica M10- P ASC 100 Edition, Instruction Manual, Page: 71 / 116

Share
Download
Leica M10- P ASC 100 Edition Instruction Manual Download Page 71

EN

71

Picture mode

A

B

C

E

D

A

 Number of pictures

B

 Exposure difference between the pictures

C

 Exposure compensation setting

D

  Light value scale

E

  Red highlighted exposure values for pictures (the scale will be 

offset by the relevant value if exposure compensation is set 

concurrently.)

Notes

• The following rule applies when using automatic bracketing: With 

automatic ISO sensitivity control (see S. 60) enabled, the 

sensitivity calculated by the camera automatically for the raw 

picture will also be applied to all other pictures in a series, i.e. 

the ISO value will not change during bracketing. This may mean 

that the slowest shutter speed specified under 

Maximum Exposure 

Time

 is exceeded.

• The focus range for automatic bracketing may be limited 

(depending on the originally set shutter speed). The specified 

numbers of pictures will be taken regardless. Several pictures in 

a series may consequently be taken with the same exposure 

values.

• The function remains active until another function is selected in 

the 

Drive Mode

 submenu, or the camera is switched off and on 

again. If no other function is selected, another series of pictures 

is taken each time the shutter button is pressed.

Summary of Contents for M10- P ASC 100 Edition





















































































































Reviews:

No comments