EN
57
Picture mode
SPLIT IMAGE METHOD
For an architectural photograph, you might aim the metering field
of the rangefinder at e.g. the vertical edge or any other clearly
defined vertical line and keep turning the focus ring on the lens
until the edge contour or the line is visible at the outer edges of the
metering field without any offset.
out of focus
in focus
Notes
• Very precise distance measurements are particularly beneficial
when using wide-angle lenses with a relatively large depth of
field.
• The metering field
2
of the rangefinder is displayed as a bright,
sharp-edges rectangle in both methods. The position of the
metering field cannot be changed. It will always be at the center
of the viewfinder.
DISTANCE METERING METHODS
IN LIVE VIEW MODE
You can set the image sharpness in Live View mode via the screen
image – it will show the image subject at the exact sharpness as it
is rendered by the lens based on the distance and aperture setting.
There may be differences between the settings displayed and those
perceived to be optimal due to specific sensitivities and functional
conditions.
▸
Turn the focus ring on the lens to focus on the desired
components of the image subject
Summary of Contents for M10- P ASC 100 Edition
Page 1: ...LEICA M10 P Instruction manual ...
Page 19: ...EN 19 ...
Page 45: ...EN 45 Camera operation ...
