manualshive.com logo in svg

Leica M10- P ASC 100 Edition, Instruction Manual, Page: 5 / 116

Share
Download
Leica M10- P ASC 100 Edition Instruction Manual Download Page 5

EN

5

Legal Notes

DISPOSAL OF ELECTRIC AND ELEC-

TRONIC EQUIPMENT

(Applies within the EU and for other European 

countries with active waste separation policies.)

This device contains electric and/or electronic components which 

must not be disposed of in general household waste. Instead, it 

should be disposed of at a recycling collection point provided by 

your local authority.

This service is free of charge. Any standard or rechargeable 

batteries used in this device must be removed and disposed of 

separately in accordance with local regulations.

Please contact your local authorities, waste disposal collection 

point or the retailer, from whom you purchased the device for more 

information on correct waste disposal.

The CE mark on our products documents compliance with the 
fundamental requirements of applicable EU directives.

Summary of Contents for M10- P ASC 100 Edition





















































































































Reviews:

No comments